An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Misc Welding Soldering Brazing Supplies Mil-Specs - FSC 3439

A-A-50291 - Brazing Alloys, Aluminum And Magnesium, Filler Metal (S/S By Aws-A5.8)

This commercial item description covers aluminum and magnesium brazing filler metal alloys having melting points above 800 deg. F.

A-A-50963 - Soldering Iron, Self Heating (Without Electric Or External Heat)

This description covers soldering irons which are heated without any type of external energy applied to the soldering tip. The heat is furnished by the firing of a single-shot heating cartridge unit loaded with a chemical thermal charge.

A-A-50971 - Soldering Iron, Non-Electric (Soldering Coppers)

This description covers non-electric soldering irons, commonly referred to as soldering coppers to be used for applying heat to melt solder and to heat metal that is to be joined by soldering.

A-A-51128 - Torch Kit, Soldering (Propane Gas)

This commercial item description (CID) covers a propane gas torch kit suitable for brazing, soldering, and heating.

A-A-51145 - Flux, Soldering, Non-Electronic, Paste and Liquid

This commercial item description (CID) covers soldering flux of the standard commercial type which is intended to be used in soldering copper, copper-base alloys, tin plate, carbon steels, alloy steels, corrosion resistant steels, and chromium alloys. This flux is not intended for use in soldering electronic or electrical circuits.

A-A-51153 - Cleaning Sets, Oxygen And Acetylene, Welding And Cutting Torch Tips

This commercial item description covers tip cleaners for hand-held oxyacetylene welding and cutting torches.

A-A-51157 - Rods And Electrodes, Welding, Bare, Copper And Copper Alloy (S/S By Aws-A5.7)

A-A-51158 - Rods, Welding, Copper And Copper Alloy, For Oxyfuel Gas Welding (S/S By Aws-A5.7)

A-A-51161 - Holders, Electrode, Shielded Metal, Arc Welding

A-A-51165 - Moisture Stabilizer, Welding Electrode

A-A-51173 - Rods And Electrode, Welding, Bare, Nickel And Nickel Alloy (S/S By Aws-A5.14)

This description covers nickel and nickel alloy bare welding rods and electrodes for plasma arc, gas metal arc, gas tungsten arc, and submerged arc welding. It includes compositions in which the nickel content exceeds that of any other element. A description and intended use of each class can be found in Ansi/AWS A5.14.

A-A-51182 - Wire, Welding, Hard Facing, Cobalt Base Alloy

This description covers cobalt welding wire of the standard, commercial type, which is for use with the inert gas shielding arc welding process for hard facing of chromium-tungsten-nickel-cobalt base metal.

A-A-55013 - Holders, Electrode, Shielded Metal, Arc Welding, Tong Type (S/S By A-A-51161)

AWS-A5.01 - Filler Metal Procurement Guidelines

AWS-A5.11 - Nickel And Nickel Alloy Welding Electrodes For Shielded Metal Arc Welding, Specification For

This specification prescribes requirements for the classification of nickel alloy covered electrodes for shielded metal arc welding. It includes those composition in which the nickel exceeds that of any other element.

AWS-A5.15 - Iron, Cast, Welding Rods And Covered Electrodes For

This specification prescribes requirements for the classification of the following.

AWS-A5.19 - Welding Rods And Bare Electrodes, Magnesium Alloy

This specification prescribes requirements for magnesium alloy welding rods for use with the gas tungsten arc and oxyfuel gas welding processes and bare electrodes for use with the gas metal arc welding process.

AWS-A5.21 - Composite Surfacing Welding Rods And Electrodes

This specification prescribes requirements for composite surfacing welding rods and electrodes.

AWS-A5.22 - Electrode, Flux Cored Corrosion Resisting Chromium And Chromium Nickel Steel

This specification prescribes requirements for flux cored corrosion-resisting chromium and chromium-nickel steel electrodes that contain at least 5 percent by weight of nonmetallic ingredients in the core.

AWS-A5.24 - Rod & Electrode, Zirconium & Zirconium Alloy Bare Welding

This specification prescribes requirements for zirconium and zirconium alloy welding rods for use with the gas tungsten arc welding process and bare electrodes for use with the gas metal arc welding process.

AWS-A5.29 - Electrode, Low Alloy Steel, For Flux Cored Arc Welding

AWS-A5.3 - Aluminum And Aluminum Alloy For Shielded Metal Arc Welding

This specification prescribes requirements for the classification of aluminum and aluminum alloy electrodes for shielded metal arc welding.

AWS-A5.30 - Insert, Consumable

This specification prescribes requirements for classification of consumable inserts.

GGG-S-595 - Soldering Iron, Nonelectric, (Coppers) (S/S By A-A-50971)

GGG-S-600 - Soldering Iron, Self Heating (Without Electric Or External Heat) (S/S By A-A-50963)

GGG-T-00570 - Torch Kit, Soldering (Propane Gas) (S/S By A-A-51128)

IPC-TM650.2.3.32 - Corrosion (Copper Mirror Method), Flux Induced

This test method is designed to determine the removal effect the fluxhas (if any) on the bright copper mirror film which has been vacuum deposited on clear glass.

IPC-TM650.2.3.33 - Flux, Silver Chromate Method Presence Of Halides

This test method is designed to determine the presence (if any) of chlorides and bromides in soldering flux by visual examination after placement on test paper.

IPC-TM650.2.3.34 - Flux, Solids Content

This test mehtod is designed to determine the residual solids content of the liquid flux after evaporation of the volatile chemicals from within the liquid flux; typically 15 percent by weight minmum.

IPC-TM650.2.3.35 - Halide Content, Quantitative (Chloride And Bromide)

This test method is designed to determine the halide content of fluxes attributable to chlorides and bromides. The halide content is reported as the weight percentage of chloride to the solid (non-volatile) portion of the flux or as milliequivalent per gram of flux solids.

IPC-TM650.2.6.3.3 - Fluxes, Surface Insulation Resistance

This test method is to characterize fluxes by determining the degradation of electrical insulation resistance of rigid printed wiring board specimens after exposure to the specified flux.

J-STD-004 - Soldering Fluxes Requirements For

This standard prescribes general requirements for the classification and testing of soldering fluxes for high quality interconnections.

J-STD-005 - Soldering Pastes Requirements For

This standard prescibes general requirements for the characteristics and testing of solder pastes used to make high quality electronic interconnections.

J-STD-006 - Electronic Grade Solder Alloys And Fluxed And Non-Fluxed Solid Solders For Electronic Soldering Applications Requirements For

This standard prescribes the requirements and test methods of electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon, and powder solders, other than solder paste, for electronic soldering applications; and for "special" electronic grade solders.

MIL-A-47193 - Aluminum Alloys, Brazing

MIL-B-15395 - Brazing Alloy, Silver (S/S By Qq-B-654)

MIL-B-20148 - Brazing Sheet, Aluminum Alloy (S/S By Sae-Ams-B-20148)

This specification covers aluminum alloy brazing sheet for use in brazed aluminum.

MIL-B-24302 - Brazing System, Near Infrared Quartz Lamp

MIL-C-1143 - Carbon Block, Carbon Paste, And Carbon Rod

MIL-C-13194 - Cloths, Cable Wiping, General Specification For

MIL-C-17223 - Cleaner, Welding And Cutting Tip (S/S By A-A-51153)

MIL-C-45948 - Carbon Block, Carbon Paste, And Carbon Rods

MIL-D-45582 - Desoldering And Resoldering Kits, Electrical

MIL-DTL-13080 - Electrodes, Welding, Covered: Austenitic Steel (19-9 Modified) For Armor Applications

This specification covers austenitic steel arc welding electrodes for use on steels of high hardenability.

MIL-DTL-22200/1 - Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen Medium And High Tensile Steel, As-Welded Or Stress-Relieved Weld Application

This specification covers iron-powder, low-hydrogen types of mineral covered electrodes, for the fabrication and repair welding of low and medium carbon and high tensile steels for as-welded and stress-relieved application.

MIL-DTL-24403/1 - Electrodes - Welding, Flux Cored, Ordinary Strength And Low Alloy Steel

This specification sheet covers ordinary strength and low alloy steel flux cored welding electrodes for use with the flux cored arc welding process with or without shielding gas.

MIL-E-13191 - ( Images) Electrode, Welding, Covered, Bronze, For General Use (S/S By Aws-A5.6)

This specification covers bronze covered electrodes for general welding of high-strength bronzes and brasses to each other, or to dissimilar metals (see 6.1).

MIL-E-13865 - Electrodes, Welding, Covered Steel, (For Hard Surfacing)(S/S By Mil-E-19141)

MIL-E-15597 - Electrodes, Welding, Covered, Coated Aluminum And Aluminum Alloy (S/S By Aws-A5.3-91, And Aws-A5.01-87)

This specification covers coated or covered metal arc welding electrodes for welding aluminum and aluminum alloys.

MIL-E-15599 - Electrode, Welding, Covered, Low- And Medium- Carbon Steel

MIL-E-15716 - Electrode, Welding, Covered, Molybdenum Alloy Steel Application (S/S By Mil-E-22200/7)

MIL-E-16053 - Electrode, Welding, Bare, Aluminum Alloys (Use Ansi/Aws A5.10-80)

MIL-E-16589 - Electrode, Welding, Mineral Covered, Low Hydrogen, Chromium-Molybdenum Alloy Steel And Corrosion Resisting Steel (S/S By Mil-E-22200/8)

MIL-E-16715 - Electrode, Welding, Covered (Austenitic Chrome-Nickel Steel, For Corrosive And High Temperature Services) (S/S By Mil-E-22200/2)

MIL-E-17496 - Electrodes, Welding, Covered, Nickel Base Alloy, And Cobalt Base Alloy (Use Mil-E-22200/3)

MIL-E-17764 - ( Images) Electrode, Cutting, Tubular, Steel, Covered

This specification covers tubular steel electrodes for use in underwater manual arc-oxygen cutting.

MIL-E-17777 - Electrodes, Cutting And Welding, Carbon-Graphite, Uncoated And Copper-Coated

This specification covers round section uncoated (plain) carbon-graphite electrodes for arc-welding, round, half-round and rectangular section copper-coated carbon-graphite electrodes for air carbon-arc cutting, and round section jointed copper-coated carbon-graphite electrodes for air carbon-arc cutting.

MIL-E-18038 - Electrodes, Welding, Mineral Covered, Low Hydrogen, Medium And High Tensile Steel As Welded Or Stress-Relieved Weld Application (S/S By Mil-E-22200)

MIL-E-18193 - Electrodes, Welding, Carbon Steel And Alloy Steel, Bare, Coiled (S/S By Mil-E-23765/1 And Mil-E-23765/4)

This specification covers bare electrode wire for welding and surfacing carbon and low-alloy steels by the semiautomatic or machine submerged-arc welding process, employing a granular flux.

MIL-E-19141 - ( Images) Electrode, Welding, Surfacing, Iron Base Alloy

This specification covers solid wire covered shielded metal arc welding electrodes for depositing iron-base, abrasion resistant weld-metal overlays.

MIL-E-19323 - Electrodes, Welding Covered, Copper-Nickel Alloy (S/S By Mil-E-22200/4)

MIL-E-19822 - Electrode, Welding, Bare, High Yield Steel (S/S By Mil-E-23765/2)

MIL-E-19933 - ( Images) Electrodes And Rods - Welding, Bare, Chromium And Chromium-Nickel Steels

This specification covers chromium l nd chromium-nickel alloy bare welding electrodes and out-length rods for use with the inert-gas metal-are (consumable electrode) and the tungsten-arc welding processes: and bare welding electrode in coils for submerged-arc welding process.

MIL-E-21562 - ( Images) Electrodes And Rods-Welding, Bare, Nickel Alloy

This specification covers nickel, nickel alloy and copper-nickel alloy bare welding electrodes and rods for use with the submerged arc (when used with a neutral flux), gas metal-arc (GMA) and gas tungsten-arc (GTA) welding processes.

MIL-E-21659 - Electrodes, Welding, Bare, Copper And Copper Alloy (S/S By Mil-E-23765/3)

MIL-E-22091 - Electrodes, Welding, Mineral Covered Low Hydrogen High Yield Strength Steel, Stress Relieved Weld Application (Use Mil-E-22200/1)

MIL-E-22200 - ( Images) Electrodes, Welding, Covered: General Specification For

This specification covers the general requirements, quality assurance provisions, test procedures, and instructions for preparation for delivery for covered welding electrodes.

MIL-E-22200/10 - Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen Medium, High Tensile And Higher-Strength Low Alloy Steels

This specification covers iron-powder, low-hydrogen types of covered electrodes for the fabrication and repair welding of low and medium carbon, high tensile, and higher-strength low-alloy steels for as-welded and stress-relieved application.

MIL-E-22200/11 - Electrodes, Welding, Mineral-Covered, Iron-Powder, Low-Hydrogen, For Producing Hy-130 Weldments To Be Heat-Treated

This specification covers low-hydrogen, iron-powder type of covered electrodes, for the fabrication and repair welding of HY-130 steel to be heat-treated.

MIL-E-22200/2 - Electrode, Welding Covered (Austenitic Chromium-Nickel Steel)

MIL-E-22200/3 - Electrodes, Welding, Covered, Nickel Base Alloy, And Cobalt Base Alloy

This specification covers nickel, nickel alloy, and chromium-cobalt alloy covered electrodes for shielded metal-arc welding with direct current (dc) reverse polarity.

MIL-E-22200/4 - Electrodes, Welding, Covered, Copper-Nickel Alloy

This specification covers 70 : 30 copper-nickel covered electrodes used for fabrication and repair welding of copper-nickel alloys.

MIL-E-22200/5 - Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen, Low- Alloy Steel For Hardening And Tempering Heat Treatment Applications Only

This specification covers low-alloy, low-hydrogen, iron-powder type of covered electrodes for shielded metal-arc welding of HY-80 steel to be hardened and tempered after welding, but not for as-welded applications.

MIL-E-22200/6 - Electrodes, Welding, Mineral Covered, Low Hydrogen, Medium And High Tensile Steel (S/S By Mil-Dtl-22200/1 And Mil-E-22200/10)

MIL-E-22200/7 - Electrodes, Welding, Covered, Molybdenum Alloy Steel Application (S/S By Aws-A5.5)

MIL-E-22200/8 - Electrodes, Welding, Covered, Low - Hydrogen, And Iron - Powder Low - Hydrogen, Chromium - Molybdenum Alloy Steel And Corrosion Resisting Steel

This specification covers electrodes for welding alloy steels used for corrosion resistance in certain media, such as petroleum crudes, and for high-temperature strength and resistance to creep.

MIL-E-22200/9 - Electrodes, Welding, Mineral-Covered, Low-Hydrogen, Iron-Powder, Low-Hydrogen, Nickel-Manganese-Chromium-Molybdenum Alloy Steel For Producing Hy-130 Weldments For As-Welded Applications

This specification covers low-hydrogen or low-hydrogen iron-powder type of covered electrodes, for the fabrication and repair welding of HY-130 steel for as-welded applications.

MIL-E-22749 - Electrodes (Bare) And Fluxes (Granular), Submerged Arc Welding, High Yield Low Alloy Steel (S/S By Mil-E-23765/2)

MIL-E-23765 - ( Images) Electrodes And Rods - Welding, Bare, Solid And Alloyed Cored, General Specification For

This specification covers the general requirements for solid bare and alloyed cored welding electrode and cut-length rods made from carbon steel, low alloy steel, chromium-nickel steel, nickel base and copper base alloys, aluminum, and aluminum alloys designed for use with the gas metal-arc (GMA), gas tungsten-arc (GTA), and the submerged-arc welding (SAW) processes, as applicable.

MIL-E-23765/1 - Electrodes And Rods - Welding, Bare, Solid And Alloyed Cored, Ordinary Strength And Low Alloy Steel

MIL-E-23765/2 - Electrodes And Rods - Welding, Bare, Solid, Or Alloy Cored; And Fluxes, Low Alloy Steel

This specification covers low alloy steel solid bare welding electrodes for use with the gas metal arc welding (GMAW) process and the submerged arc welding (SAW) process employing a neutral granular flux, low alloy steel cored bare welding electrodes for use with the GMAW process and the SAW process employing a neutral granular flux, and low alloy steel solid bare electrodes and cut length rods for use with the gas tungsten arc welding (GTAW) process.

MIL-E-23765/3 - Electrode, And Rods - Welding, Bare, Solid Copper Alloy

This specification covers solid bare copper alloy electrodes and cut-length rods for use with the gas metal-arc (GMA) and gas tungsten-arc (GTA) welding processes.

MIL-E-24355 - ( Images) Electrodes, Welding, Bare, Solid-Nickel-Manganese-Chromium-Molybdenum Alloy Steel For Producing Hy-130 Weldments For As-Welded Applications

This specification covers the requirements for bare steel electrodes for welding HY-130 steel by using mechanized (automatic) gas tungsten-arc (GTA) process, manual (semi-automatic) or mechanized (automatic) gas metal-arc (GMA) welding process with spray transfer type arc, or pulsed spray welding type arc.

MIL-E-24403 - ( Images) Electrodes - Welding, Flux Cored General Specification For

This specification covers the general requirements for flux cored welding electrodes designed for use with the flux cored arc welding process with or without gas shielding.

MIL-E-24403/2 - Electrodes - Welding, Flux Cored, Low-Alloy Steel

This specification covers low-alloy steel flux cored welding electrodes for the fabrication of HY-80 and HY-100 steel weldments for as-welded applications.

MIL-E-278 - ( Images) Electrodes, Welding, Covered, Aluminum Bronze (See Notice 1 For Acquisition Information)

This specification covers aluminum bronze electrodes for use with the shielded metal arc process.

MIL-E-8697 - ( Images) Electrodes, Welding, Covered, Low-Hydrogen, Heat-Treatable Steel

MIL-E-986 - Electrodes, Welding, Mineral Covered, Low Hydrogen-As-Welded Applications On High Strength Steels (Use Mil-E-22200/1)

MIL-F-12784 - Flux, Soldering (Stearine Compound Ic-3)

This specification covers a stearic acid soldering flux (see 6.1).

MIL-F-14256 - Flux, Soldering, Liquid, Paste Flux, Solder Paste And Solder-Paste Flux, (For Electronic/Electrical Use), General Specification For (S/S By J-Std-004, J-Std-005 And J-Std-006)

MIL-F-16136 - Flux, Welding (For Copper Base And Copper Nickel Alloys And Cast Iron)

MIL-F-18251 - Fluxes, Welding, Submerged Arc Process Carbon And Low-Alloy Steel Application (S/S By Mil-E-23765/4)

This specification covers fluxes for welding carbon and low-alloy steels by the submerged arc process with A1 and B1 types bare coiled electrodes of MIL-E-18193.

MIL-F-19922 - Fluxes, Welding (Compositions), Submerged Arc Process With Type "B" Electrodes, Carbon And Low-Alloy Steel Application (S/S By Mil-E-23765/4)

This specification covers granular welding compositions ("fluxes") for welding carbon and alloy steels and making steel surfacing deposits by the submerged arc process in conjunction with "B" type bare coiled electrodes of Specification MIL-E-18193.

MIL-F-20329 - Flux, Soldering, Rosin Base, General Purpose (S/S By O-F-506 And Mil-F-14256)

MIL-H-865 - Holder, Electrode, Shielded Metal, Arc Welding (S/S By A-A-51161)

This specification covers welding electrode holders for use in the shielded metal are welding process.

MIL-I-23413 - Inserts, Welding, Filler Material, Coiled And Solid Rings

This specification covers consumable insert material in coil and solid ring forms designed for replacement in weld joints fabricated from carbon steel, alloy steels, aluminum alloy, and nickel base alloys (including copper nickel alloy (70/30)).

MIL-M-45558 - Moisture Stabilizer, Welding Electrode (S/S By A-A-51165)

This specification covers one type of electrically heated moisture stabilizer used in protecting welding electrodes from absorbing excessive moisture.

MIL-P-24389 - Programmer, Stress Relief For Near Infrared Quartz Lamp Furnace System

MIL-P-8853 - Paste, Copper Brazing, Water Thinning (S/S By Sae-Ams3430)

MIL-R-17131 - Rods And Powders, Welding, Surfacing

This specification covers welding rods and powders to be used for the purpose of overlaying with a material resistant to erosion and abrasion.

MIL-R-18818 - Rods, Welding, Aluminum Bronze, Surfacing, Inert-Gas Tungsten-Arc Process (Use Mil-R-19631)

MIL-R-19631 - Rod, Welding, Copper And Copper Alloy (See Notice 2 For Replacement Information)

MIL-R-47191 - Rod, Welding, High Strength

MIL-R-5031 - Rod & Wire, Welding, Corrosion & Heat Resistant Alloys (See Aws A5.9-77 & A5.14-76)

MIL-R-5632 - Rods And Wire, Steel, Welding (For Aircraft Applications) (S/S By Sae-Ams6457, Sae-Ams6452, Sae-Ams6456, Sae-Ams6459, Sae-Ams6331, Sae-Ams6461, Sae-Ams6462, Sae-Ams6458, Sae-Ams5027 And Sae-Ams5028)

This specification covers the requirements for bare filler rods and wire of low-alloy aircraft steels suitable for use with gas and arc welding processes.

MIL-R-81588 - Rods And Wire, Welding, Titanium And Titanium Alloys (See Notice 1 For Replacement Information)

MIL-R-908 - Rod, Welding, Steel And Cast Iron (For Gas Welding) (Use Aws A5.2-69)

MIL-S-19234 - Solder, Cadmium-Silver

MIL-S-3601 - Soldering Machine

MIL-S-45847 - Soldering And Brazing Outfit, Resistance Heating

MIL-S-45864 - Soldering Irons, Non&Electric Tl&624( )/U And Tl&670( )/U

MIL-S-4938 - Soldering Iron, Electric, 28 Volt Dc, 100 Watt

MIL-STD-1628 - Fillet Weld Size, Strength, And Efficiency Determination

MIL-W-21149 - Welding Accessory Kit, Electric

MIL-W-47192 - Welding Rod And Wire, Nickel Alloy High Permeability, Shielding Grade

MIL-W-8939 - Welding, Resistance, Electronic Circuit Modules (S/S By Mil-Prf-53095)

MS16857 - Electrode, Underwater Cutting, Tubular, Ceramic

NEMA-EW2 - Electric, Consumable Arc Welding Electrodes And Rods

O-F-499 - ( Images) Flux, Brazing, (Silver Brazing Filler Metal, Low Melting Point)

This specification covers low-melting-point fluxes for use with silver brazing filler metal in brazing ferrous and nonferrous metals, excluding light metals and their alloys.

O-F-506 - Flux, Soldering: Paste And Liquid (S/S By A-A-51145)

This specification covers two types of flux to be used in soldering copper, copper, copper-base alloys, tin plate, carbon and alloy steels, heat-resistant and high chromium alloys, and corrosion-resistant steels.

QPL-13080-5 - Electrode, Welding, Covered, Austenitic Steel (19-9 Modified For Armor Application

QPL-14256-88 - Flux, Soldering, Liquid, Paste Flux, Solder Paste And Solder-Paste Flux, (For Electronic/Electrical Use), General Specification For (S/S By J-Std-004, J-Std-005, J-Std-006)

QPL-15597-19 - Electrodes, Welding, Covered, Coated, Aluminum And Aluminum Alloy

QPL-15599-51 - Electrode, Welding, Covered, Low And Medium- Carbon Steel (Use Qq-E-450)

QPL-15716-38 - Electrodes, Welding, Covered, Molybdenum Alloy Steel Application

QPL-16053-91 - Electrode, Welding, Bare, Aluminum Alloys (Use Ansi/Aws A5.10-80)

QPL-16589-62 - Electrodes, Welding, Mineral Covered, Low Hydrogen, Chromium-Molybdenum Alloy Steel And Corrosion Resisting Steel

QPL-18038-46 - Electrode, Welding, Mineral Covered, Low Hydrogen, Medium And High Tensile Steel As Welded Or Stress-Relieved Weld Application

QPL-19141-36 - Electrode, Welding, Surfacing, Iron Base Alloy

QPL-19323-3 - Electrode, Welding, Covered, Copper Nickel Alloy

QPL-19822-12 - Electrodes, Welding, Bare, High-Yield Steel

QPL-19933-66 - Electrodes And Rods - Welding, Bare, Chromium And Chromium-Nickel Steels(Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-21562-44 - Electrodes And Rods-Welding, Bare, Nickel Alloy (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-22200-65 - Electrodes, Welding, Covered; General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 2 For Additional Information)

QPL-22749-7 - Electrode (Bare) And Fluxes (Granular), Submerged Arc Welding, High-Yield Low-Alloy Steels (See Notice 1 For Replacement Information)

QPL-23765-52 - Electrodes And Rods - Welding, Bare, Solid And Alloyed Cored, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-24355-8 - Electrodes, Welding, Bare, Solid, Nickel-Manganese-Chromium Molybdenum Alloy Steel For Producing Hy-130 Weldments For As-Welded Applications (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-24403-36 - Electrodes-Welding, Flux Cored, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-45057 - Electrodes Welding Mineral Covered Low Hydrogen For Repair Welding Of Alloy Steel Castings

QPL-6843-9 - Electrode, Welding, Covered, Mild And Alloy Steel (For Aircraft Applications

QPL-8697-8 - Electrodes, Welding, Coating, Low Hydrogen, Heat-Treatable Steel

QPL-QQ-E-450-20 - Electrodes, Welding, Covered: Mild Steel

QPL-QQ-S-571-110 - Solder, Electronic (96 To 485 Deg. C) (S/S By J-Std-004, J-Std-005, J-Std-006)

QQ-B-650 - Brazing Alloys, Copper, Copper-Zinc, And Copper-Phosphorus (S/S By Aws A5.01 And Aws A5.8)

This specification covers copper, copper-zinc, and copper-phosphorus alloys for use in brazing ferrous and nonfereous base metals. Copper-phosphorus brazing alloys shall not be used on ferrous alloys or on alloys containing more than 10 percent of nickel because of the adverse effects of the phosphorus content (see 6.1).