A-A-51145D
3.2 Safety. The soldering fluxes shall not emit fumes in sufficient volume to become noxious when heated to soldering temperatures with ventilation equal to four air changes per hour.
3.3 Marking. Each container shall be permanently marked or labeled as to manufacturer, part number, and the following statement: "Not for use on electrical or electronic components". Any flux containing zinc chloride shall have the following information printed on the container: "Contains zinc chloride".
3.4 Performance.
3.4.1 Type I, form A and B. The type I flux shall be capable of protecting copper, copper-base alloys, tin plate, carbon steels, alloy steels, and corrosion resistant steels from oxidation and be capable of reducing and dissolving a thin film of oxides which may be present.
3.4.2 Type II, form B. The type II flux shall be capable of reducing chromium oxide surface films and shall be suitable for use in soldering chromium alloys.
4. REGULATORY REQUIREMENTS
4.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4.2 Environmental protection. The item shall meet all applicable Environmental Protection Agency restrictions in effect on the date of the contract. These regulations apply to the emission of materials hazardous to the environment or the user's health and shall be adhered to during the manufacturing, service, transportation, storage, and operation/use of the item.
5. PRODUCT CONFORMANCE PROVISIONS
5.1 Product conformance. The products shall meet the salient characteristics of this commercial item description; conform to the manufacturer's own drawings, specifications, standards, and quality assurance practices; and shall be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance.
5.2. Responsibility for inspection. Unless otherwise specified (see 7.3(d)), the contractor is responsible for the performance of all inspection requirements as specified herein. The Government reserves the right to perform any of the inspections set forth in this description where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.
5.3 Responsibility for compliance. All items shall meet the requirements specified herein. The inspection set forth in this description shall become a part of the contractors overall inspection system or quality program. The absence of any inspection requirements in the description shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. Sampling inspection, as part of
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business