MIL-DTL-13080E
TABLE IB. Classes and sizes with welding positions.
________________________________________________________________________________
Class
Diameter: in.(mm)
Length: in.(mm)
Welding positions
________________________________________________________________________________
1
1/8, 5/32
14 (356)
All (overhead, vertical,
(3.2, 4.0)
horizontal and flat)
2
3/16 (4.8)
14 or 18
Horizontal fillets and flat
(356 or 457)
2
7/32, 1/4
18 (457)
Horizontal fillets and flat
(5.56, 6.4)
3
5/16, 3/8
18 or 24
Flat
(8.0, 9.5)
(457 or 610)
________________________________________________________________________________
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure
the completeness of this list, document users are cautioned that they must meet all specified
requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-A-12560
Armor Plate, Steel, Wrought, Homogeneous (For Use In Combat-Vehicles
and For Ammunition Testing).
MIL-E-22200/1
Electrodes, Welding, Mineral Covered, Iron-Powder, Low Hydrogen
Medium and High Tensile Steel, as Welded or Stress-Relieved Weld
Application
HANDBOOKS
DEPARTMENT OF DEFENSE
MIL-HDBK-1264 Radiographic Inspection for Soundness of Welds in Steel by Comparison to
Graded ASTM E390 Reference Radiographs.
(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are
available from the Defense Automated Printing Service (DAPS), Building 4D, 700 Robbins Avenue,
Philadelphia, PA 19111-5094.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business