INCH-POUND
MIL-DTL-24403/1F(SH)
16 June 2008
SUPERSEDING
MIL-DTL-24403/1E(SH)
22 May 2008
DETAIL SPECIFICATION SHEET
ELECTRODES WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the products described herein shall consist of this specification sheet and
MIL-E-24403.
1. SCOPE
1.1 Scope. This specification sheet covers ordinary strength and low alloy steel flux cored welding electrodes
for use with the flux cored arc welding process with or without shielding gas.
1.2 Classification. Electrodes are of the types specified in Table I, and of the forms and sizes in accordance
with MIL-E-24403. In addition to the sizes specified in MIL-E-24403, the 0.035-inch size may be used for
MIL-71T-1, MIL-81T1-Ni1 and MIL-81T1-Ni2 electrodes, and the 0.068- and 0.072-inch sizes may be used for
self-shielded electrodes.
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05M2, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160
or emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 3439
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business