MIL-DTL-24403/1F(SH)
ASTM INTERNATIONAL
ASTM A131/A131M
-
Standard Specification for Structural Steel for Ships (DoD adopted)
(Copies of this document are available from ASTM International, 100 Barr Harbor Dr., PO Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
NCSL INTERNATIONAL
NCSL Z540.1
-
Calibration Laboratories and Measuring and Test Equipment-General
Requirements (DoD adopted)
(Copies of this document are available from NCSL International, 2995 Wilderness Place, Suite 107, Boulder,
CO 80301-5404 or online at https://www.ncsli.org.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. Electrodes furnished under this specification shall be products that are authorized by the
qualifying activity for listing on the applicable qualified products list before contract award (see 4.2 and 6.3).
3.2 Finish. Copper or other suitable coatings may be used.
3.3 Chemical composition. Chemical composition of the deposited weld metal shall be as specified in Table I.
3.4 Mechanical properties. The mechanical properties of deposited weld metal shall be as specified in Table II.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business