MIL-E-19141D
21 Mav 1984
SUPERSEDING
MIL-E-19141C
16 July 1959
(See 6.8)
MILITARY SPECIFICATION
ELECTRODES, WELDING, SURFACING, IRON-BASE ALLOY
This specification is approved for use by all Departments and Agencies
of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers solid wire covered shielded metal
arc welding electrodes for depositing iron-base, abrasion resistant weld-metal
overlays.
1.2 Classification. Surfacing electrodes shall be furnished in the
types, classes and sizes shown in table I, as specified (see 6.2.1).
TABLE 1.
Types, classes and sizes.
Type
Class
Positions of
Sizes
welding
(diameter)
MIL-I-A2a
2
Horizontal and flat
1/8, 5/32
3
3/163 1/4
Flat
MIL-1-A2c
2
Horizontal and flat
1/8, 5/32
3
Flat
I
I
I
2.
APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. Unless otherwise specified, the
following specifications and standards of the issue listed in that issue of
the Department of Defense Index of Specifications and Standards (DoDISS) speci-
-
fied in the solicitation form a part of this specification to the extent
specified herein.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy,
Washington, DC 20362 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document
or by letter.
FSC 3439
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business