MIL-DTL-22200-1 Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen Medium And High Tensile Steel, As-Welded Or Stress-Relieved Weld ApplicationThis specification covers iron-powder, low-hydrogen types of mineral covered electrodes, for the fabrication and repair welding of low and medium carbon and high tensile steels for as-welded and stress-relieved application.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL-DTL-22200/1H(SH)

TABLE I. Types, classes, positions of welding, and sizes - Continued.

NOTES � Continued:

The suffix RC added to the MIL-type pertains to restriction of the copper content (see 3.5).

All requirements, tests, and acceptance criteria remain otherwise unchanged.

Addition of the suffix SR to the basic MIL-type designation indicates a special MIL-type

electrode formulated to meet the long time (50 hours) stress-relieved mechanical

properties/requirements only.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This

section does not include documents cited in other sections of this specification or recommended for additional

information or as examples. While every effort has been made to ensure the completeness of this list, document

users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this

specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a

part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-E-22200

Electrodes, Welding, Covered: General Specification for

MIL-S-22698

Steel Plate, Shapes and Bars, Weldable Ordinary Strength and Higher

Strength: Structural

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-2035

Nondestructive Testing Acceptance Criteria

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or

https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,

Philadelphia, PA 19111-5094.)

2.2.2 Other Government documents, drawings, and publications. The following other Government documents,

drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,

the issues of these documents are those cited in the solicitation or contract.

NAVSEA TECHNICAL PUBLICATIONS

T9074-AS-GIB-010/271

- Requirements for Nondestructive Testing Methods

T9074-BD-GIB-010/0300 - Base Materials for Critical Applications: Requirements for Low-Alloy

Steel Plate, Forgings, Castings, Shapes, Bars, and Heads of HY-80/100/130

and HSLA-80/100

(Copies of these documents are available from the Naval Logistics Library, 5450 Carlisle Pike, Mechanicsburg,